Felt Board Fridays: Week #3

Sorry I know this is a little late. A mix between holidays and no computer made it really hard to get this one done in time. I apologize if you were anxiously anticipating this felt board idea. I hope you can find it in your heart to forgive me:)

So some friends and I decided to do a craft night every month and complete a quiet book. November we did Mr. Potato head. Until I get my little bug's book done I thought this would be a fun felt board activity to do.

Here is Mr. Potato Head

One of my favorites is Mr. Missionary Potato Head. (I also made a red tie for him to wear)

And of course Mrs. Potato Head

I'm so glad with how these turned out and they were fairly simple to do too. Good luck with yours and I would love to see how it turned out. Email us pictures at ourdiydiaries@gmail.com.

And good news Felt Board Fridays is being extended to December. I realized that I missed the first Friday in November. Plus I still have a few more ideas... Come back Friday!

~Courtney

I'm rubber, your glue...

     Do you remember when we were in elementary school and some rotten bully would say something mean to us? What was your response? The most popular one when I was in school was “I’m rubber, your glue, anything you say bounces off me and sticks to you.” That’s what this dresser is saying to me…(and I’m not even a rotten bully)

     I had such high hopes for this dresser. I saw so muchpotential. With each failing attempt, my hopes fall just bit and its potential diminishes;but, I REFUSE to give up. My parents and Mr. Awesome will be the first to tellyou just how stubborn I can be. 

Find the Fabulous and Free Post here

     I started off by sanding and quickly realized that wouldn’t be enough; it would have to be stripped. So I went down to trusty ol Home Depot and bought me some stripper. I opted for the spray can, thinking it would be plenty and easier to use…FAIL #1.  If you need to ever use stripper, buy the quart size and save yourself the trouble. The spray can did not go very far AT ALL!  I also want to stress the importance of wearing rubber gloves…they don’t joke when they say it will burn so just take their word and mine.  I even accidently got it on my jeans and I could still feel it. Now I’m not sure if it was the brand of stripper or the dresser itself but I haven’t been impressed with the stripping process. 

Remember...get the quart size! It's worth it.

     I followed the directions on the quart of stripper but not all of the varnish stripped off. I repeated the stripping process a couple times, sanded, and then wiped it down with TSP water and then clean water. One would think that would be enough, right? FAIL # 2!

Wait the appropriate amount of time and for the stripper to
bubble before beginning to strip.

     There were some significant chunks missing out of two of the legs so I grabbed my wood putty and rigged a way that would allow me to fill them in easier (see pictures for explanation) Once the legs were fixed and the other holes filled in, I glued in my shelves and waited for the glue to dry.

This allowed me to fill in the hole instead of
trying to create a straight edge from scratch. 

Filled in with putty

Sanded smoot

Isn't my nephew cute? He stopped by with Grandpa and
I couldn't resist taking his picture. So Handsome!

Do you like my improv clamps for the back?

      After the shelves were glued into place I cut out the holesin the back to allow the cables and cords to go through the back (have Imentioned that this is going to be our t.v. stand?)

     Since it appeared to be stripped and sanded down to barewood, I didn’t see the need for primer…FAIL #3 After all, I was painting it adark purple so no need to prime it white first (no judging my color choice, itWILL be awesome)

     I was finally read for paint. I had to thin the paint out considerablyto get it through my gun (I think I need a different gun, what do you think?) Iput on the first super thincoat and it seemed to go on just fine. I then waited for it to dry. When I wentback out, prepared to lightly sand it before the next coat, I noticed that thepaint just ran, and ran, and ran. Talk about irritating. I took out the sandpaperand began to lightly sand…off came the paint. FAIL #4! I ran a cloth over thelegs super lightly and the paint just peeled off. The paint did not stick inthe slightest. Annoying? Yes!

     Out came the stripper…again. I stripped this stubborn thing4 times! and this is how it turned out. Unfortunately, the stripper removedsome of the putty from the fixed legs…FAIL #5. I opted to just cut the legs offan inch since the dresser could stand to lose some height and I figured theputty would keep chipping off in that area.  I sanded it…again, this time going against thegrain in hopes of roughing it up better.

     The top of the dresser didn’t cooperate very well and it hadsome low uneven spots so I decided to go get some 5mm panel and used contactcement to adhere that to the top. I then routed the edges down to the size Ineeded. 

     Now, this left me with some pretty unattractive raw edges so I went to Home Depot and found some decorative trim that I liked. I measured the lengths and cut the edges at a 45 degree angle. I lined up the trim and glued them on using normal wood glue.

     After all this, I was finally ready to prime. Or so Ithought anyways. I went out all ready to prime just to find that my shelves hadcome unglued…FAIL #6. It was one of those moments where you stand there and genuinelyask yourself if this project is worth it or if you should just trash the wholething. Would you have given up? I didn’t. I attempted to glue the shelves backin but this time with contact cement (that will hold anything right?) FAIL #7!Not even contact cement would keep these shelves in place. That’s where the oldelementary school saying popped into my head. Nothing sticks to this thing!

     This is the point that I am at now. I can’t say that I amexcited for this project anymore but I will persevere and hope that it getsbetter…or at least doesn’t get worse.

I look forward to writing the finish post for this projectand hopefully sometime soon.

Would you have given up? Do you still see potential or am I fighting a loosing battle?

Felt Board Fridays: Week #2

 

Welcome back for another felt board friday. I hope your felt board turned out ok. You can see Week 1 here. 

This week at home we put up our Christmas tree. I know it's early, but The Hubs was excited to put it up and it got us to clean. What else can I ask for?? As we are putting up the tree I thought it'd be fun to make our little bug his own tree to decorate. Here it is...

I just folded a piece of felt in half and drew out my tree. Remember I'm no artist. As long as your kiddo doesn't mind you should be fine. Then cut your tree.

Here is how mine turned out. See, far from perfect.

I used a glue stick to trace my ornaments out. You could use whatever you want  for the size you like. The fun thing with this is you can do shapes too. Really whatever. Use it to practice shapes, colors, patterns. Anything!

I put all the pieces in a zip lock bag and labeled it so I can tell from the outside what it is. My little bug likes it so far. Just have to be careful he doesn't put it in his mouth. It's a little advance for him, but he'll grow into it.

 

Come back next week for Week #3 of Felt Board Fridays I'm really excited about this one:)

~Courtney

Felt Board Friday: Week #1

I am going to do a series of posts every Friday in November (possibly and hopefully longer depending on my creativity) called Felt Board Fridays. I am very excited about this because I am always looking for ways to entertain my Little Bug. He's still a little young for it, but he enjoys it and will grow into it.

So for week one I will show you how to make a felt board. It is super easy and fairly cheap. Mine cost around $2. All you need is a foam poster board. I bought mine at Micheal's on sale for $1, they also sell them at Dollar Tree. Some felt, bought at Joanns for around $2 a yard I think. Measure before you go so you know how much you need. I ended up with a lot extra. Scissors and a hot glue gun.

It is pretty basic, but just in case I will post instructions for those that may need it. First cut your felt to be an inch or so bigger than your foam board. (Please excuse my cutting!)

Next glue your sides down.

 I cut a little bit off the corners so there wouldn't be so much excess.

Now here is the sucky part. I just realized I don't have a picture of the finished product. And I am at my parents house doing this post because our computer/ camera was stolen. To read that story click here. So for the meantime, just use your imagination on how it will turn out.

On the back of mine I made a little pocket out of felt to hold the different pictures/stories.


Any questions let me know. Sorry this is a half done post, but really it is super easy and I know that you can do it! Good luck and make sure you come back next Friday for week #2 of Felt Board Fridays!

***Update Here is the finished product. Hope you didn't have any trouble with yours.


 



~Courtney

Oh what I wouldn't give for some inspiration!

Hey guys! 

Don't get terribly excited just yet. This isn't one of those awesome before and after reveals. I simply need inspiration, and lots of it!

I picked up these end tables at the local Goodwill for $5 each

I especially love the one on the right!

I'm a sucker for curvy furniture

I found this one interesting and asked Mr. Awesome what he thought. I believe his words were something along the lines of "It's $5, lets just get it!" 

So fabulous friends and readers.....what colors do YOU think would look good for these 2 end tables?

Welcome to Felt Board Fridays!